All Thread Rods
Ferry Cap Screws
Flat Steel Washers
Hex Cap Screws
Hex Tap Bolts
Socket Screw Products
For Phone Quote Inside 714, call (714) 375-1963
For Phone Quote Outside Area Code 714, call (888) 565-1963
For FAX Quote, call (714) 596-1090
For Email Quote click here.
hex lock nuts,
grease fittings,, fastners, best nuts bolts, bestnutsbolts, metal fasteners, industrial fasteners,
nuts, bins, bolts, screws, anchors, anchor bolts, cap screws, clamps, connectors, counter-bore screws,
dowel pins, drywall screws, fittings, hex, hooks, metric, pins, rivets, stainless, studs, terminals,
threadware, washers, weatherhead, steel washers, tap bolts, hex tap bolts, plow bolts,
california, tee, tees, tube, tubing, concrete, plated, socket, steel,
building fasteners, catalog, flange bolts, flat steel washers,
formed fittings, hex cap screws, hex locknuts, hex tap bolts, Lake Erie,
Lincoln grease fittings, lock washers, machine screws, malleable pipe fittings,
metal building fasteners, metrics, non-ferrous, socket screw products, specialty nuts,
structural washers, tapping screws, wood screws,
lags screws, hose clamps, copper tubing, Dorman, metal boxes, storage
Best Nuts 'n Bolts
We Solve Your Problems!
California Distributors of Wholesale and Retail
Metal Industrial Fasteners at Incredible
MORE HEX LOCK NUTS
SPS Flexloc -- available in all popular sizes . . . Full, heavy and
jam patterns. . . Clinch and Swage Nuts . . . N.C. & N.F. Threads . . . Steel (plain and plated)
. . . Corrosion-resistant Steel . . . a very good nut for all applications.
ROUND STAINLESS STEEL RATCHET ACTION LOCKING PIN
ANCO -- Positive locking action under shock or vibration. The pin acts as a ratchet during
assembly, preventing any tendency to back off under vibration. Reusable. Steel, 2H, A325,
hot dip galvanized. Call us for specs.
NYLON INSERT -- the nut spins freely on the bolt until the threads enter the nylon collar
where they impress but do not cut threads into the nylon. This compression forces metal-to-metal
contact between internal and external threads causing a friction fit that meets existing vibration-proof
standards. All popular metals and sizes. High temperature and reduced sizes o.k.
Nuts are pre-assembled with tooth-type lockwashers to form free-spinning
locknuts. Unlike prevailaing torque type nuts, this type of bearing locknut does not lock
onto mating threads in any manner. It must be firmly clamped against a bearing surface so
that the teeth of the lockwasher may "dig in" and perform their vibration resistant duties.
This type of nut can also be assembled with helical-spring and conical-spring lockwashers.
The tooth type is by far the most popular and is uaually supplied zinc plated. Their range
is from #4 diameter to 3/8" diameter.
The right picture shows a preassembled nut & lock washer.
Trade names: "KEPS", "K-LOCK", "TITES" and others.
The bearing (underside) surface of this nut has a series of encircling serrations
or teeth. These teeth are designed so that they do not grip or impede rotation as the nut is
assembled onto the bolt. When the nut is fully wrenched down the teeth resist "back-off" as
vibrations or other loosening forces are applied. These nuts are reusable.
This type of nut is also made without the flange configuration.
Trade Names: "WHIZ-LOCK", "FLANGE-LOCK", "TENSILOCK" and others.
FLANGE LOCK NUT
One piece, all metal, free spinning
For more Hex Locknuts, click here.